Tổ hợp dầm H
Rê chuột vào hình để phóng to

Tổ hợp dầm H

MÃ SỐ
57
Tính năng nổi bật

Automatic assembling machine adopts roller bed and frequency control.

Adopts built-in PLC controller, with automatic spot welding and fast assembling speed

 

  • 0931.333.869

H-BEAM assembly machine 

Special feature:

  1. This H-beam assembly machine adopts built-in PLC controller, with automatic spot welding and fast assembling speed.
  2. There is the manual alignment device at the output end, making the steel accurate alignment and easy operation.
  3. The new type Z20B H-beam automatic assembling machine puts the main transmission motor and reducer in the middle of underside beam, which will reduce the width of the occupied field.
  4. Compared with oil cylinder driving and one side mechanical positioning type, this H-beam assembly machine has the advantages of high precision, strong clamp force, better stability and rigidity.
  5. The clamping sliding device adopts rectangular rail type sliding couple which can adjust the sliding clearance accurately and avoid the overlong extrusion of slide bushing to affect the precision when assemble small size H-beam, and also can avoid the replacement of this part due to wear and tear after a long time use.
  6. This H-beam automatic assembling machine adopts roller bed and frequency control.
  7. All the clamping rollers are connected by eccentric shaft which can realize the fine tuning of the centering precision (theoretically centering precision<1mm).
  8. Clamping roller adopts front and back arrangement, and total four groups and up and down two layers. This structure has a better straightening to plate deformation and improves the centering precision.

Product description:

This series of group legislature has a variety of specifications, the flange and web self-centering hydraulic clamping. Z20B type compared with similar products, the scope of a wider, more cost-effective, web front and rear wheel clamp four groups arranged in two layers structure, and can be corrected on the web bending, multiple sets of guide wheel positioning accuracy and more accurate can eliminate wagging tail phenomenon.

H-beam Assembly

 

Model

Z20B

Z15

Z18

Z20

Z25

Z30

 

Specifications applicable web

Thickness(mm)

80

50

50

50

50

50

 

Height (mm)

160-2000

200-1500

200-1800

200-2000

200-2500

200-3000

 

Applicable wing specifications

Thickness(mm)

80

60

60

60

60

60

 

Height (mm)

150-800

200-800

200-800

200-800

200-1000

200-1000

 

For the workpiece length (mm)

4000-15000

 
 

Assembling speed (m / min)

5~6

 
 

Installed power (KW)

9.5

11.7

 
 

 

Sản phẩm cùng loại