Tổ hợp dầm H

H-BEAM assembly machine 

Special feature:

1. This H-beam assembly machine adopts built-in PLC controller, with automatic spot welding and fast assembling speed.
2. There is the manual alignment device at the output end, making the steel accurate alignment and easy operation.
3. The new type Z20B H-beam automatic assembling machine puts the main transmission motor and reducer in the middle of underside beam, which will reduce the width of the occupied field.
4. Compared with oil cylinder driving and one side mechanical positioning type, this H-beam assembly machine has the advantages of high precision, strong clamp force, better stability and rigidity.
5. The clamping sliding device adopts rectangular rail type sliding couple which can adjust the sliding clearance accurately and avoid the overlong extrusion of slide bushing to affect the precision when assemble small size H-beam, and also can avoid the replacement of this part due to wear and tear after a long time use.
6. This H-beam automatic assembling machine adopts roller bed and frequency control.
7. All the clamping rollers are connected by eccentric shaft which can realize the fine tuning of the centering precision (theoretically centering precision＜1mm).
8. Clamping roller adopts front and back arrangement, and total four groups and up and down two layers. This structure has a better straightening to plate deformation and improves the centering precision.

Product description:

This series of group legislature has a variety of specifications, the flange and web self-centering hydraulic clamping. Z20B type compared with similar products, the scope of a wider, more cost-effective, web front and rear wheel clamp four groups arranged in two layers structure, and can be corrected on the web bending, multiple sets of guide wheel positioning accuracy and more accurate can eliminate wagging tail phenomenon.