Máy hàn Dầm H
Rê chuột vào hình để phóng to

Máy hàn Dầm H

MÃ SỐ
59
Tính năng nổi bật

With unique designed arc guiding rack, this H-beam welding machine can satisfy the small size steel and cross beam welding

Has back and forth welding function

Frame travels by frequency conversion control

 

  • 0931.333.869

H-BEAM Welding Machine 

Special features

  1. This H-beam welder adopts one-button drive, and the gantry frame and welding machine can be synchronous running.
  2. Frame travels by frequency conversion control, stable driving and simple operation.
  3. This H-beam welding machine is equipped with mechanical type tri-axial tracking system. It  not only can meet the minimum 140mm ×140mm H-beam welding, but also can be used for cross beam with following specifications: the depth of welding seam should be less than 500mm, and the width of open between flanges should more than 150mm.
  4. With unique designed arc guiding rack, this H-beam welding machine can satisfy the small size steel and cross beam welding.
  5. The H-beam welder adopts chain and sprocket mechanism. The welding arm can float up or down to make tracking welding line according to the plainness conditions of work-piece. Through the dead weight of welding arm and arc guiding rack to make arc guiding roller press the work-piece tightly.
  6. The tracking system equipped with fine adjustment device can guarantee the precise position of welding gun and avoid the phenomenon of deviated welding.
  7. This H-beam welding machine has back and forth welding function, which can save the time and improve productivity.
  8. The wire spool rack has the merits of simple operation and wide scope of application, suitable for 50—350KG wire spool.
  9. Our H-beam welder owns mature and stable flux feeding and recovery system. The overload and short-circuit protections of recovery motor adopt ABB breaker which is reliable and superior.

Product description:

This series of group legislature has a variety of specifications, the flange and web self-centering hydraulic clamping. Z20B type compared with similar products, the scope of a wider, more cost-effective, web front and rear wheel clamp four groups arranged in two layers structure, and can be corrected on the web bending, multiple sets of guide wheel positioning accuracy and more accurate can eliminate wagging tail phenomenon.

Yangtong_H_Beam_Welding_4

Yangtong_H_Beam_Welding_2_1

 

Model

LHA

LHT

LHC

Gauge(mm)

4000

5000

5500

1600

1150

Control Type

In the control

Side control

In the control

Side control

In the control

Side control

In the control

Side control

Web height(mm)

160-1200

160-1500

160-2000

160-2000

160-2200

160-2500

160-2500

160-2000

Flange width(mm)

140-800

For the workpiece length (mm)

4000-15000

Welding speed(m / min)

0.24-2.4

Installed power (kw)

9

9.7

9

4.6 ( without welding machine )

 

Sản phẩm cùng loại