Máy cắt thủy lực HACO - TS (X)
Máy cắt thủy lực HACO - TS (X)
Rê chuột vào hình để phóng to

Máy cắt thủy lực HACO - TS (X)

MÃ SỐ
28
Tính năng nổi bật

The TS machines are guillotine type shears. Cutting action is a scissors cutting action. 

The hydraulic cylinders on the TS shears are positioned directly underneath the ram

Pull the ram in a downwards direction.

  • 0931.333.869

TS (X)

Special features:

Our TS guillotines are the most budget friendly machines in our shearing line. The TS machines are guillotine type shears. This means that the cutting action is a scissors cutting action. The hydraulic cylinders on the TS shears are positioned directly underneath the ram and pull the ram in a downwards direction.

Product descriptions:

The most budget friendly machines in our shearing line

Guillotine shears have several advantages above swing-beam type shears. They are made to cut several material types and thicknesses.

All TS guillotines are standard fitted with the new SP9 control, conveniently located at the left hand side of the machine, within the immediate reach of the operator.

Quick manual blade gap              

The quick manual blade gap adjustment is located at the front of the machine on 6mm models, or at the rear of the machine for 12mm models. Blade gap adjustment ranges from 0,05mm for very light sheet thickness and progressively increases up to the maximum blade gap required for heavier shear capacities.

The rake angle is electro-hydraulic driven and controlled from the operator pane. The angle adjustment moves between 0.5° for thin sheets and 3° for thicker sheets.

TS_1

The right pressure setting

The sheet hold-downs on the TS guillotine models are hydraulic controlled and use a separate hydraulic circuit with separate pump. A pressure activated switch is used for the right pressure setting.

Table blocks: advantages

TS guillotines have table blocks on all models instead of solid tables. The table blocks have several advantages:

  • It's easier for the operator to grab the sheet from the side
  • Less chance of smashing fingers between the work piece
  • The table and the dirt from hot rolled steel will not lie down on the table but will fall in between the blocks

We offer blocks with ball transfers as an option on all shearing machines.

TS_6TS_4

Type

 

2006

3006

3012

Capacity mild steel
(400N/mm2)

mm

6

6

12

Cutting length E

mm

2050

3050

3050

Angle adjustment

degrees

0.5 - 3

0.5 - 3

0.5 - 3

Number of plate
hold-downs

 

13

18

18

Number of strokes / min

 

10 -15

8 - 14

7 - 14

Length squaring arm

mm

1000

1000

1000

Stroke motorised
back gauge

 

MOT version (standard)

mm

750

750

1000

SUB version (opt.)

mm

820

820

SAB version (opt.)

mm

1000

Working height D

mm

770

770

930

Motor power

kW

7.5

7.5

22.5

Length A

mm

2880

3880

4220

Width (without CE
Safety fences) B

mm

*1650

*1650

*2030

Width (including CE
Safety fences)

mm

*2660

*2660

**2800

Height

mm

1660

1700

2210

Weight (appox.)

kg

3500

4500

8500

*MOT version/**SAB version

Sản phẩm cùng loại