Maple - Vertical Machining Center
ME Series
ME-855
Maple ME series models uses linear guide ways and high accuracy ballscrews constructed of high quality importation materials.
The controller can be equipped with Fanuc / Mitsubishi / Siemens / Heidenhain.
X/Y/Z-Axis Travel(mm): 850/550/550
Spindle Motor(Fanuc/Mitsubishi):11/7.5 kw
SPECIFICATION
Model |
Unit |
ME-855 |
Table |
|
|
Area of Table |
mm |
1000 x 550 |
Working Area |
mm |
850 x 550 |
T-Slot |
mm |
100 x 18 x 5 |
Work Table Max Weight |
kg |
800 |
Travel |
|
|
X-Axis Travel |
mm |
850 |
Y-Axis Travel |
mm |
550 |
Z-Axis Travel |
mm |
550 |
Spindle Nose to Table surface |
mm |
150-700 |
X/Y/Z-Guide way type |
mm |
Linear guideway |
Spindle |
|
|
Spindle Taper |
|
BT40 |
Spindle R.P.M. |
rpm |
10000 |
spindle Motor(Fanuc) |
kw |
11 |
Spindle Motor(Mitsubishi) |
kw |
7.5 |
Three-Axis Motor |
|
|
X/Y/Z-Axis Servo Motor(Fanuc) |
kw |
1.8/1.8/3.0BS |
X/Y/Z-Axis Servo Motor(Mitsubishi) |
kw |
1.5/1.5/3.0BS |
3-Axis Cutting Feed Rate |
mm/min |
10000 |
3-Axis Rapid Traverse |
M/min |
36/36/36 |
Others |
|
|
Machine Weight |
kg |
4300 |
STANDARD ACCESSORIES
Standard Features |
|
Air gun |
Auto power off |
Volumetric type automatic lubricator |
Mechanical oil coolant separator |
Tool box |
LED 3 color warning light |
Rigid tapping |
Hand wheel |
Enclosed Guard |
Operation & maintenance manual |
Low energy work light |
Leveling screws & blocks |
OPTIONAL ACCESSORIES
Optional Features |
|
Tool changer(16、20、24) |
Coolant through spindle |
Tool breakage system |
Chip wash system |
Tool measuring system |
Spindle upgrade to direct drive 10000/12000/15000 rpm |
Linear scale |
Spindle upgrade to belt type 12000 rpm |
Screw type chip conveyor |
Spindle upgrade built-in 18000/24000 rpm |
Chain type chip conveyor |
|
Spindle oil cooler |
|