Heavy Duty Lathe
Appication and Feature:
Famous AC inventer variable speed device has been selected by the machine, the main driving has beed driven by AC motor, 4 step infinitely variable can be realized by sliding the gear. Excellent performances of torque and power has been equipped. The operating system of the machine has been controlled by electric, hydraulic, mechanical mechanism, the carriage has functions of rapid traverse and combinating feed, easy for operating. The using range of this series of machines are wide, it can finely meet the requirement of every kind of industry, machining such as external cylinder, internal hole, slot, face and threads. It also can meet the requirements of drilling, boring, broaching old groove, keyway and so on. It is an excellent mechanical equipment for turning axial, iscal, sleeve and special ty surfaces workpieces.
Main parameters |
Model |
CWA6185 CWA6285 |
CWA61100 CWA62100 |
Swing over bed |
mm (in) |
850 (34) |
1030 (41) |
Swing over gap |
mm (in) |
1150 (46) |
1350 (54) |
Swing over carriage |
mm (in) |
520 (21) |
720 (28) |
Max. turning length |
mm (in) |
1500-16000 (60-640) |
|
Max. weight of workpiece between centers |
kg |
4000 |
|
Width of the bed |
mm (in) |
600 (24) |
|
Spindle noses No. |
ISO |
A2-11 |
|
Diameter of spindle front bearing |
mm (in) |
160 (6.4) |
|
Diameter of spindle hole |
mm (in) |
100 (4) |
|
Taper hole of spindle |
|
Metric No. 120 |
|
Number of spindle speeds |
|
(Manual operating) |
|
Range of spindle speeds |
r/min |
5-630 |
|
Main motor power |
kW |
AC15 |
AC18.5 |
Rapid traveling speed of motor power |
kW |
1.1 |
|
Section of tool shank |
mm (in) |
32 x 32 (1.3 x 1.3) |
|
Swivel angle of tool post |
|
±90° |
|
Travel of tool post |
mm (in) |
250 (10) |
|
Travel of cross side |
mm (in) |
600 (24) |
|
Rapid travelling speed of tools post |
mm (in) |
900 |
|
Rapid travelling speed of transverse |
mm (in) |
1800 |
|
Rapid travelling speed of longtitudinal |
mm (in) |
3640 |
|
Metric threads number and range |
mm |
56 1-120 |
|
Inch threads number and range |
T.P.I |
56 30-1/4” |
|
Modul threads number and range |
mm |
56 0.5-60 |
|
Diameter pitch threads number and range |
D.P. |
56 60-0.5 |
|
Longitudinal number and range of feeds |
m/rev |
64 0.08-9.6 |
|
Transverse number and range of feeds |
m/rev |
64 0.04-4.8 |
|
Longtitudinal number and range of feeds |
m/rev |
64 0.02-2.4 |
|
Diameter of tailstock quill |
mm (in) |
120 (4.8)” |
|
Taper hole of tailstock quill |
|
Morse No.6 |
|
Travel of tailstock quill |
mm (in) |
250 (4.8)” |
|
Weight of lathe with 3m.b.c |
Kg |
5300 |
5800 |
Additional weight per 1m.b.c |
Kg |
1000 |
|
Machine overall dimension (LxWxH) (3m) |
mm |
5150 x 1500 x 1500 |
5150 x 1600 x1600 |
Standard accessories
Optional accessories